Machining of tube ends
Basing on the most performed production lines tube ends are machined and afterwards chamfered inside and/or outside.
A very particular machining enables RTW Rohrtechnik to offer tubes with radiused chamfers.
| Outer diameters | |
|---|---|
| Außendurchmesser | 5,0 – 60,0 mm |
| Wall thicknesses | 0,7 – 6,0 mm |
| Lengths | 5,0 – 1.500,0 mm |
| Length tolerance | ± 0,1 mm |
| Restricted tolerances | < ± 0,1 mm (on request) |
| Basic materials | steel, inox, aluminium, copper |
